image
unavailable
|
Oxfam is a development, relief, and campaigning organisation that works with others to find lasting solutions to hunger, poverty and suffering around the world.
http://www.oxfam.org
|
image
unavailable
|
UNICEF is the driving force that helps build a world where the rights of every child are realized. We have the global authority to influence decision-makers, and the variety of partners at grassroots level to turn the most innovative ideas into reality.
http://www.unicef.org
|
image
unavailable
|
The Red Cross, a humanitarian organization led by volunteers, guided by its the Fundamental Principles, provides relief to victims of disasters and help people prevent, prepare for, and respond to emergencies accross the world.
http://www.redcross.org
|
|
| Top Wood Lathes |
|
|
- Delta 240v Midi Lathe La200ce
- Draper 370w 230v Twin Bed Bar Revolving Head Wood Lathe
- Draper 550w 230v Variable Speed Wood Lathe With Stand
- Elektra Beckum Hdm 100 240v Wood Turning Lathe
- Sealey Wood Lathe 10-speed 900mm Centres
- Draper Woodlathe Stand Wtl30/Wtl100a
Click Here For Top Wood Lathes
|
| Top DIY Shops |
B&Q
|
| |
DIY Tools
|
| |
Screwfix
|
|
 |
Draper 240v 1000mm Woodlathe + Stand
Suitable for the keen hobbyist and semi-professional, this five speed twin bed wood lathe is fitted with an induction motor with a no-volt overload safety switch and a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with twin bed bar, revolving centre, drive centre and 144mm face plate. Display carton.
* Turning capacity: Diameter: 350mm, Between Centres: 1000mm
* Speeds (rpm): 5 (500 - 2500)
* Spindle thread size: 3/4" x 16tpi
* Spindle taper: MT1
* Overall length: 1545mm
* Weight: 31kg |
|
 |
Draper Variable Speed Woodlathe 350w
Ten speed positions allowing the user to carry out various woodturning operations. Fitted with a revolving headstock suitable for small and large bowl turning. Complete with an induction motor, no-volt overload safety switch and a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with purpose-made stand (also available separately Stock No. 39050), tool rest, 4 prong drive centre, revolving tailstock centre and rotating headstock. Display packed.
* Turning capacity: Diameter: 300mm, Between Centres: 815mm
* 10 speeds-variable: 500-2400 rpm
* Spindle thread size: 3/4" x 16tpi
* Spindle taper: MT1
* Overall length: 1450mm
* Weight: 80kg |
|
 |
Sealey Wood Lathe 10-speed 1100mm Centres
Manufactured to comply with CE requirements. Powered by smooth operating 550 Watt induction motor. Plate clutch allows seamless speed control without the need to stop the motor and adjust belts and pulleys. Hollow centred head and tail stocks allow hole boring. One-piece machined lathe bed with head stock extension for bowl turning and sanding operations. Head stock rotates through five preset positions for outboard bowl turning. Includes floor stand and BS approved 3 pin plug. |
|
 |
Sealey Wood Lathe 5-speed 940mm Centres
Manufactured to comply with latest CE requirements. Powered by 555 Watt induction motor with no-volt load release switch which prevents re-start after the mains power has been interrupted. Hollow centred head and tail stocks allow hole boring. Lathe is suitable for inside or outside bowl turning. Supplied fitted with a BS approved, non-rewirable 3 pin plug and cable.
* Supplied with: Face Plate, Live and Dead Centres, Revolving Dead Centre, 150 and 300mm Tool Rests
* Turning Capacity: Over Bed: 300mm
* Turning Capacity: Over Tool Rest: 200mm
* Thread Size: 3/4” x 16tpi
* Distance Between Centres: 940mm
* Turning Speeds: 470, 810, 1300, 2200, 3200rpm
* Motor: 555W - 230V |
|
|
